Gel series batteries are designed to meet the requirements of frequent cyclic and high temperature applications. Such as broadband, PVs etc. through up-to-date gel technologies. Our gel batteries uses German origin high purity fumed silica to form sulfuric acid thixotropic Gel and fills to the batteries with vacuum to ensure the fully penetration of electrolyte through separators and plates pastes.
100 hours rate(0.78A 11.1V)
20 hours rate(3.25A 10.8V)
10 hours rate(6.3A 10.5V)
1 hour rate(38.7A 9.6V)
Full charged battery 77°F(25°C):9mΩ
Operating Temperature Range
Discharge:-20 to 60 °C
Charge:-10 to 60 °C
Storage:-20 to 60 °C
3% of capacity declined per month at 20°C(average)
Max discharge current77°F(25°C):650A(5S)
Charge (Constant Voltage)
Float:13.38 to 13.68V/77°F(25°C)
Cycle:14.28 to 14.52V/77°F(25°C)
Gelcondition: The effect of sealed reaction is over 99.9%.
Low rate of loss of coolant.
Long service lift: The designed lift is over twelve years.
Good deep charge cycle performance.
Good over-discharging recovery performance.
Widely working environment: The Gel battery can be used at widely difference in temperature from subzero 40°C to 60°C.
Packaging & Shipping
Q : what is AGM battery
A : The newer type of sealed non-spillable maintenance free valve regulated battery uses "Absorbed Glass Mats", or AGM separators between the plates. This is a very fine fiber Boron-Silicate glass mat. These type of batteries have all the advantages of gelled, but can take much more abuse. These are also called "starved electrolyte. Just like the Gel batteries, the AGM Battery will not leak acid if broken.
Q : what is Gel battery
A : A gel battery design is typically a modification of the standard lead acid automotive or marine battery. A gelling agent is added to the electrolyte to reduce movement inside the battery case. Many gel batteries also use one way valves in place of open vents, this helps the normal internal gasses to recombine back into water in the battery, reducing gassing. "Gel Cell" batteries are non-spillable even if they are broken. Gel cells must be charged at a lower voltage (C/20) than flooded or AGM to prevent excess gas from damaging the cells. Fast charging them on a conventional automotive charger may be permanently damage a Gel Battery.
Q : What is a gel cell battery or sealed lead acid battery?
A : Gel cell or sealed lead acid batteries have basically the same chemistry as wet or flooded cell batteries. The batteries' electrolyte is in a gelatin form and is absorbed into the plates. The battery is then sealed with epoxy. These batteries may be used in any position. They are exceptionally leak resistant. Applications include UPS devices, emergency lights, and wheelchairs. These batteries contain 2 volts per cell with common voltages of 4, 6, and 12 volt.
Q: If a battery fails, what will be the indications?
A : You should first check the battery for defects such as a broken circuit, a short, or a broken container. If an outward problem is not apparent, then you will have to check the battery's capacity using known measuring techniques to ascertain the problem.
Q : Why "zero voltage" might happen?
A : Zero voltage means there is a broken circuit. There could be several reasons for a zero voltage state. 1.There could be a broken electrode column 2.Welding defects of the partition 3.Welding defects of the terminal
Q : How about your delivery time uauslly ?
A :7-10 days for common model battery , 15-20 days for the other special battery.
Q : What is your warranty time for the car battery ?
A :We have 1 year, 2 years , 3 years warranty time for different batteries based on different target markrt .
Q: Can you print my picture or logo on the battery cover ?
A: Yes, OEM is available,we can print your picture or logo on the battery case when we have your authorization .