• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Guangdong, China (Mainland)
  • Brand Name: storace
  • Model Number: SR2.3-12
  • Usage: UPS
  • Voltage: 12v
  • Sealed Type: Sealed
  • Maintenance Type: Free
  • Size: 178x34x66 mm
  • Weight: 0.9kgs
  • Nominal Capacity: 2.3ah
  • color: black
  • cell: 6
  • Terminal type: lead
  • separator: AGM
  • Battery case: ABS
  • safety: explosion-proof
  • Plate: flat plate
  • The charging current rate: <0.3c
  • package: 20pcs/carton
  • customs code: 8507200000

Packaging & Delivery

Packaging Details carton ,pallet
Delivery Time Shipped in 15 days after payment

12v 2.3ah Sealed lead-acid battery for emergency light 

(SR2.3-12)

 

Valve regulated lead acid series ups batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications.

 

Battery Structure

1. Container/Cover: Made of UL94HB and LU 94V-0 ABS Plastic

2. Negative Plates: Use the special PbCa alloy grids, optimize the recombination efficiency and less gassing.

3. Separator: Import high quality AGM separator.

4. Positive Plates: PbCa grids minimize corrosion and prolong life.

5. Terminal post: Cooper material with maximum conductivity, enhance the high current rapidly.

6. Vent Valve: Allows the release of excess gas automatically for safety.

 

Main Application

 

Characteristic curve

Factory & Office

Certifications

 

Packaging & Shipping

 

FAQ

Q :   what is AGM battery

A  :  The newer type of sealed non-spillable maintenance free valve regulated battery uses "Absorbed Glass Mats", or AGM separators between the plates. This is a very fine fiber Boron-Silicate glass mat. These type of batteries have all the advantages of gelled, but can take much more abuse. These are also called "starved electrolyte. Just like the Gel batteries, the AGM Battery will not leak acid if broken.

 

Q :   what is Gel battery

A  :  A gel battery design is typically a modification of the standard lead acid automotive or marine battery. A gelling agent is added to the electrolyte to reduce movement inside the battery case. Many gel batteries also use one way valves in place of open vents, this helps the normal internal gasses to recombine back into water in the battery, reducing gassing. "Gel Cell" batteries are non-spillable even if they are broken. Gel cells must be charged at a lower voltage (C/20) than flooded or AGM to prevent excess gas from damaging the cells. Fast charging them on a conventional automotive charger may be permanently damage a Gel Battery.

 

Q :   What is a gel cell battery or sealed lead acid battery?

A  :  Gel cell or sealed lead acid batteries have basically the same chemistry as wet or flooded cell batteries. The batteries' electrolyte is in a gelatin form and is absorbed into the plates. The battery is then sealed with epoxy. These batteries may be used in any position. They are exceptionally leak resistant. Applications include UPS devices, emergency lights, and wheelchairs. These batteries contain 2 volts per cell with common voltages of 4, 6, and 12 volt.

 

Q:  If a battery fails, what will be the indications?

A:  1.Lower performance 
      2.Low voltage 
      3.Cannot charge/recharge 
      4.Swelled container 
      5.Acid corrosion

 

Q :   How can you tell if a battery is good or bad?

A  :  You should first check the battery for defects such as a broken circuit, a short, or a broken container. If an outward problem is not apparent, then you will have to check the battery's capacity using known measuring techniques to ascertain the problem.

 

Q :  Why "zero voltage" might happen?

A  :  Zero voltage means there is a broken circuit. There could be several reasons for a zero voltage state. 
1.There could be a broken electrode column 
2.Welding defects of the partition 
3.Welding defects of the terminal

 

Q :  How about your delivery  time  uauslly  ?

A  : 7-10 days  for common model battery , 15-20 days  for the other special battery.

 

Q :  What  is your warranty time  for the car battery  ?

A  :  We  have  1 year, 2 years , 3 years warranty time  for different batteries based  on different target markrt .

 

Q:  Can you print my picture or logo on the battery cover ?

A:  Yes, OEM is available,we can print your picture or logo on the battery case when we have your authorization .

 

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland)
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $27,000
Learn More